Survey Instruments
Concrete testing instruments
Soil testing instruments
Structural Analysis Laboratory
 
Concrete Testing Instruments
 
Vicat Needle Apparatus
Specification:-
The apparatus consist of a metallic frame bearing a freely mocable rod with a cap at top.
 
 
Slump Test Apparatus
Specification:-
It is used for the determination of the consistency of freshly mixed concrete, where the maximum size of the aggregate does not exceed 38mm.

The slump cone has internal dia of 20cm at base and 10cm dia at top and 30cm height.
 
 
Gauging Trowel
Specification:-
 
 
Spatula
Specification:-
 
 
Cube Mould 150x150mm
Specification:-
These are available in different sizes and are made according to Indian and British standard.
 
 
Cube Mould 7.06x7.06 cm
Specification:-
These are available in different sizes and are made according to Indian and British standard.
 
 
Vibrating Table 20"x20"
Specification:-
It is designed to carry a load of 140kgs. The apparatus consist of a motor fitted with a variable pitch pulley housed in a cabinet. The vibrations are imparted by means of off-balance masses rotating on the shaft of a vibrator clamped to the underside of the table top.
 
 
Vibrating Machine
Specification:-
Vibrating machine consist of a vibrating frame assembly and an electric motor mounted on a sturdy base. The complete frame consist of a vice to hold a 7.06cm cube mould and two studs thread at the top and a hopper feed the sample in the mould.
 
 
Compression testing Machine 1000KN (Hand Operated)
Specification:-
A compression testing machine consist of a load frame with suitable platens and a pumping unit with pressure gauge either hand operated or electrically-cum hand operated.

We have a range of compression testing machine capacity from 10 tonnes to 200 tones in different models.
 
 
Compression testing Machine 1000KN (Electric cum Hand Operated)
Specification:-
A compression testing machine consist of a load frame with suitable platens and a pumping unit with pressure gauge either hand operated or electrically-cum hand operated.

We have a range of compression testing machine capacity from 10 tonnes to 200 tones in different models.
 
 
Flexure Testing Machine (Hand Operated)
Specification:-
It is motorised  mechanical unit. The speed is adjusted so that the load increases on the specimen is between 4 to 6 kg/sec. This instrument is used for testing 40mm x 40mm x 160mm mortar specimen for flexure by single point load.
 
 
 
Contact us
Contact Person : Mr. Azeem Ahmed
Office : C-4 (E), Ramnagar Industrial Estate, Roorkee (Uttarakhand) - 247667
Mobile : +91 - 9997922618
Email : averexinstruments@gmail.com
Location Map
Home  |  Company Profile  |  Our Products  |  Download Catalogue  |  Contact Us  |  Enquiry
Copyright © Nexus Technologies. All Rights Reserved.
Website Developed by Team Exabyte